Sorry, no posts matched your criteria.
indehoy Bench, 2018-07-15 18:09:31. Benches should generally not be lined up in a row because this makes it difficult for a group to have a conversation. (Where there are many passersby or where there is an outstanding view, benches can be lined up.)
indehoy Bench, 2018-07-15 18:09:25. Black steel legs hold up a tufted cushioned seat, drawing a beautiful line across any room. Place at the end of a low-rise bed, in an entry-way or around a dining table for stylish seating. It doubles as a slender table option in front of a sofa. Elegant and useful, this is a contemporary eyecatcher for any space.
indehoy Bench, 2018-07-15 18:09:26. Using slats that are the same size aids in replacement and labor costs. Bench seating, for example, can be more economical by using as few as two different slats in one bench. Slat replacement can be made easier by the way it is attached to the bench structure and tradeoffs may need to be considered between ease of replacement and frequency of replacement. For example, a rod through a contour bench requires more time to be replaced than using bolts directly to the bench structure. However, the rod attachment is stronger and so it does not have to be replaced as often as using bolts.
indehoy Bench, 2018-07-15 18:09:28. Painting slats and supports requires time and funds. Some ways around painting are: using aluminum for supports; galvanizing steel supports before painting; staining instead of painting slats; and using concrete (such as in concrete standard or wall hung benches) to avoid corrosion or rust.
indehoy Bench, 2018-07-15 18:09:36. Benches should be placed within view of the action, but out of the way of the flow of pedestrian traffic. They should be set back at least 24 inches from the pedestrian walkway to allow space for people walking by. (However, a bench should not be set back too far, or it will not be used.)
indehoy Bench, 2018-07-15 18:09:29. The resins in both western cedar and northern white cedar render these woods resistant to both insects and rot. Cedar is a lightweight wood, making it the perfect choice if you plan to move or rearrange your outdoor furniture often. Cedar is also a good choice if you would like your bench to match your house or other furnishings, since it paints and stains well. In fact, yearly cleaning and sealing of cedar are recommended, as the soft grain becomes rough over time if left untreated. Left in a natural state, cedar weathers to an elegant silvery gray over time. Bear in mind that cedar is rather soft, so it will dent and scratch more easily than harder woods like shorea or teak. Paradoxically, since cedar retains moisture, rather than drying out, it’s more resistant to cracking than many other woods.
indehoy Bench, 2018-07-15 18:09:37. Bench, long seat that may be freestanding, fixed to the wall, or placed against the wall. Paneled benches were used by the Romans, and they were the most common form of seating in medieval halls at a time when a chair was a rare luxury reserved for those of high status. Benches were not only used as seats but were normally wide enough to be used for sleeping on or eating from; as the Frankish ecclesiastic and historian Gregory of Tours recorded, when King Chilperic I was sitting with Bishop Bertrand, he had before him a bench bearing food.
indehoy Bench, 2018-07-15 18:09:30. A bench can also be more practical than a set of chairs if, let’s say, you have an oval table and you decide to complement it with a curved seat. Usually, when furnishing a dining space, we get a table and we immediately think to put some chairs around it. But just because this option is so common doesn’t necessarily mean it’s also the best one for every type of space and decor. In fact, sometimes too many individual chairs can make a space look cluttered and smaller and a much better option is to have banquette seating instead.
indehoy Bench, 2018-07-15 18:09:36. Using slats that are the same size aids in replacement and labor costs. Bench seating, for example, can be more economical by using as few as two different slats in one bench. Slat replacement can be made easier by the way it is attached to the bench structure and tradeoffs may need to be considered between ease of replacement and frequency of replacement. For example, a rod through a contour bench requires more time to be replaced than using bolts directly to the bench structure. However, the rod attachment is stronger and so it does not have to be replaced as often as using bolts.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does snehdeepskitchen.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.